The VL53L0X is a new generation Time-of-Flight (ToF) laser-ranging module housed in the smallest package on the market today, providing accurate distance measurement whatever the target reflectances unlike conventional technologies. It can…
The PAJ7620 integrates gesture recognition function with general I2C interface into a single chip forming an image analytic sensor system. It can recognize 9 human hand gesticulations such as moving up, down, left, right, forward, backward,…
The LIS3DSH is an ultra-low-power high-performance three-axis linear accelerometer belonging to the “nano” family with an embedded state machine that can be programmed to implement autonomous applications.
The Si1145 is a low-power, reflectance-based, infrared proximity, ultraviolet (UV) index, and ambient light sensor with I2C digital interface and programmableevent interrupt output
The TMP102 device is a digital temperature sensor ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C without requiring calibration or external component signal conditioning
In this article we connect a VEML6075 sensor to a Linkit One. The VEML6075 is an advanced ultraviolet (UVA / UVB) light sensor with an I2C protocol interface and designed in the CMOS process. An accurate VEML6075 UVI sensing system requires…
In this example we look at an VEML6070 UV sensor and connect it to a Linkit One The VEML6070 is an advanced ultraviolet (UV) light sensor with I2C protocol interface and designed by the CMOS process. It is easily operated via a simple I2C…
In this article we connect a SHT20 sensor to a LinkIt one and the example is written in the Arduino IDE The SHT2x series consists of a low-cost version with the SHT20 humidity sensor. the SHT2x provides calibrated, linearized sensor signals…
In this example we connect an Ethernet shield to an Arduino, we then connect a GY-21P sensor to this and we will send the values to Thingspeak
In this example we connect an Ethernet shield to an Arduino, we then connect a MPL3115A2 sensor to this and we will send the values to Thingspeak