Browsing Category
Linkit Code
CCS811 digital gas sensor and LINKIT example
In this article we will connect a CCS811 gas sensor to a Linkit One and we will create an example using the Arduino IDE to display the values via web page and also a version which displays values on a web page
LinkIt One and LX1972 light sensor example
The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm. The…
OPT3001 Digital Ambient Light Sensor and LinkIt one example
In this example we will connect an OPT3001 to a linkIt one The OPT3001 is a sensor that measures the intensity of visible light. The spectral response of the sensor tightly matches the photopic response of the human eye and includes…
LinkIt One and MAX44009 ambient light sensor example
The MAX44009 ambient light sensor features an I²C digital output that is ideal for a number of portable applications such as smartphones, notebooks, and industrial sensors. At less than 1µA operating current, it is the lowest power ambient…
Linkit one and LSM6DS3 accelerometer and gyroscope example
The LSM6DS3 is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 1.25 mA (up to 1.6 kHz ODR) in high-performance mode and enabling always-on low-power features for an optimal motion experience…
Linkit One and BMA250 acceleration sensor
The BMA250E is an advanced, ultra-small, triaxial, low-g acceleration sensor with digital interfaces, aiming for low-power consumer electronics applications. Featuring 10 bit digital resolution, the BMA250E allows low-noise measurement of…
Linkit One and MS5611 barometric pressure sensor example
In this example we connect a MS5611 barometric pressure sensor to a LInkit One
LinkIt and TMP175 digital temperature sensor example
In this example we take a look at the TMP175 temperature sensor, connected to a Linkit one and the example will be craeted using the ARduino IDE
Linkit One and TEMT6000 light sensor
TEMT6000X01 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a miniature transparent 1206 package for surface mounting. It is sensitive to visible light much like the human eye and has peak sensitivity at 570 nm.
Linkit One and MAX30100 oximetry and heart-rate monitor sensor example
The MAX30100 is an integrated pulse oximetry and heart-rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals.