Browsing Tag

LinkIt ONE

Linkit One and MMA7361 example

The MMA7361L is a low power, low profile capacitive micromachined accelerometer featuring signal conditioning, a 1-pole low pass filter, temperature compensation, self test, 0g-Detect which detects linear freefall, and g-Select which allows…

Linkit One and ADXL335 accelerometer example

The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in…

Linkit One and PCF8574 example

The PCF8574 is an 8 bits I/O port expander that uses the I2C protocol. Using this IC, you can use only the SDA and SCL pins of your Linkit One board to control up to 8 digital I/O ports.

Linkit One and AD Keypad example

I purchased this module as part of a microcontroller kit, its an interesting little module as it has 16 buttons but with only 1 I/O line is required, an analog input. You connect this to your Arduino and read in the value. The concept is…

Linkit One and SHT11 example

The SHT1x digital humidity sensor is a reflow solderable sensor. The SHT1x series consists of a low-cost version with the SHT10 humidity sensor, a standard version with the SHT11 humidity sensor, and a high-end version with the SHT15…

Linkit One and BME280 sensor example

The BME280 is a humidity sensor features an extremely fast response time which supports performance requirements for emerging applications such as context awareness, and high accuracy over a wide temperature range.

Linkit One and BMP085 module example

The BMP085 offers a measuring range of 30 to 110 kPa with an absolute accuracy of down to 0.1 kPa. It uses piezo-resistive technology for robustness, accuracy and linearity as well as long term stability. This sensor supports a voltage…