Arduino and MPL3115A2 sensor data to Thingspeak example
In this example we connect an Ethernet shield to an Arduino, we then connect a MPL3115A2 sensor to this and we will send the values to Thingspeak
Browsing Tag
temperature
Sending temperature data to ubidots from an Arduino
The SHT21 is a low cost humidity and temperature sensor. Its an I2C device so again is very simple to connect to any arduino. In this case we will send sesnor data to ubidots The SHT2x sensors contain a capacitive type humidity sensor, a…
Linkit One and HDC1008 humidity and temperature sensor
The HDC1008 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature…
Linkit One and BMP180 example
The bmp180 from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins. The BMP180…
Linkit One and a SHT31 temperature and humidity sensors
SHT31 is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip that is at the heart of Sensirion’s new humidity and temperatureplatform. The SHT3x-DIS has increased intelligence,…