Browsing Category
Code
PAJ7620 gesture sensor and LinkIt One
The PAJ7620 integrates gesture recognition function with general I2C interface into a single chip forming an image analytic sensor system. It can recognize 9 human hand gesticulations such as moving up, down, left, right, forward, backward,…
LIS3DSH accelerometer sensor and Linkit One example
The LIS3DSH is an ultra-low-power high-performance three-axis linear accelerometer belonging to the “nano” family with an embedded state machine that can be programmed to implement autonomous applications.
Linkit One and Si1145 sensor example
The Si1145 is a low-power, reflectance-based, infrared proximity, ultraviolet (UV) index, and ambient light sensor with I2C digital interface and programmableevent interrupt output
Linkit One and TMP102 digital sensor example
The TMP102 device is a digital temperature sensor ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C without requiring calibration or external component signal conditioning
VEML6075 ultraviolet light sensor and LinkIt One example
In this article we connect a VEML6075 sensor to a Linkit One. The VEML6075 is an advanced ultraviolet (UVA / UVB) light sensor with an I2C protocol interface and designed in the CMOS process. An accurate VEML6075 UVI sensing system requires…
VEML6070 ultraviolet light sensor and LinkIt example
In this example we look at an VEML6070 UV sensor and connect it to a Linkit One The VEML6070 is an advanced ultraviolet (UV) light sensor with I2C protocol interface and designed by the CMOS process. It is easily operated via a simple I2C…
SHT20 temperature and humidity sensor and LinkIt
In this article we connect a SHT20 sensor to a LinkIt one and the example is written in the Arduino IDE The SHT2x series consists of a low-cost version with the SHT20 humidity sensor. the SHT2x provides calibrated, linearized sensor signals…
Arduino and GY_21P sensor data to Thingspeak example
In this example we connect an Ethernet shield to an Arduino, we then connect a GY-21P sensor to this and we will send the values to Thingspeak
Arduino and MPL3115A2 sensor data to Thingspeak example
In this example we connect an Ethernet shield to an Arduino, we then connect a MPL3115A2 sensor to this and we will send the values to Thingspeak
MPL3115A2 pressure sensor and LinkIT example
In this article we connect a MPL3115A2 sensor to a LinkIT one. The MPL3115A2 is a compact, piezoresistive, absolute pressure sensor with an I2C digital interface. MPL3115A2 has a wide operating range of 20 kPa to 110 kPa, a range that…