Browsing Category

Linkit Code

Linkit one and MCP9808 digital temperature sensor

MCP9808 digital temperature sensor example The MCP9808 digital temperature sensor converts temperatures between -20°C and +100°C to a digital word with ±0.5°C (max.) accuracy. The MCP9808 comes with user-programmable registers that provide…

Linkit One and BMP180 example

The bmp180 from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins. The BMP180…

Linkit One and a SHT31 readings on a web page

In this example we will expand on our SHT 31 example - Linkit One and a SHT31 temperature and humidity sensors and we will output the temperature and humidiity on a web page The layout is the same as previous Layout Code This example uses…

Linkit One display temperature on a webpage

In our previous LM35 example   we simply displayed the temperature via the serial port but lets take it a bit further and display some temperature readings on a web page. First of all the Linkit One comes with various aerials that you can…

Linkit One and an LM35 sensor

In this example we will connect an LM35 temperature sensor to our Linkit One The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The…